SKF 6310 ZNRJEM Single Row Ball Bearings

Mass needle roller and cage assembly:0.32 kg; Fw:165 mm; Fatigue load limit Pu:28.5 kN; Ew:173 mm; U:26 mm; Basic dynamic load rating C:76.5 kN; Limiting speed:2800 r/min; Basic static load rating C0:265 kN; Reference speed:2400 r/min;

B:11.00 mm; D:35.0000 mm; Grease Speed Rating n1:19000 rpm; Accessories:Without Accessories; Oil Speed Rating Open/Shielded n2:24000 rpm; Grease Speed Rating Open/Shielded n1:19000 rpm; Basic Dynamic Radial Load Rating C:7800 N; Oil Speed Rating n2:24000 rpm; Fillet Radius ra:0.64 mm; Sealed Speed R

Fillet Radius ra:2.50 mm; Oil Speed Rating n2:3800 rpm; d:80.000 mm; B:48.00 mm; Basic Static Radial Load Rating Co:156000 N; Basic Dynamic Radial Load Rating C:183000 N; D:200.0000 mm; Grease Speed Rating n1:2600 rpm; Fillet Radius rb:1.00 mm;

Grease Speed Rating Open/Shielded n1:2600 rpm; Accessories:Shield & Seal; D:225.0000 mm; Fillet Radius ra:2.00 mm; B:35.00 mm; Basic Dynamic Radial Load Rating C:125000 N; Sealed Speed Rating n3:1700 rpm; d:150.000 mm; Basic Static Radial Load Rating Co:125000 N; Oil Speed Rating Open/Shielded n2:32

Mass lock nut:92.6 kg; b:45 mm; B5:110 mm; Associated eyebolt for handling:M 12; d3:710 mm; h:25 mm; Lock washer / Locking clip:MS 31/600-560; B:85 mm; Associated spanner:TMFN 500-600; d1:650 mm;

Lock nut:N 13; Threads per inch:18; d1:55.563 mm; B4:15.9 mm; Hydraulic nut:HMVC 13E; d3 max.:85.852 mm; B:14.554 mm; G:64.719 mm; Mass adapter sleeve assembly:0.79 kg; Sleeve:S 113x2.3/16;

d:140 mm; Fatigue load limit Pu:275 kN; Roller and cage thrust assembly:K 89328 M; Housing washer:GS 89328; Minimum axial load factor A:0.769; Basic dynamic load rating C:640 kN; Da max.:152 mm; r1,2 min.:2.1 mm; Reference speed:670 r/min; Limiting speed:1300 r/min;

db min.:70 mm; r1,2 min.:1.5 mm; Ca min.:0.2 mm; d2 ≈:79 mm; Da max.:111 mm; Basic static load rating C0:180 kN; D1 ≈:106 mm; B2:15 mm; ra max.:1.5 mm; B1:50 mm;

D:1333.5 mm; Comparative radial load rating CF:4400 kN; Thrust factor K:1.76; T:463.55 mm; Mass bearing:2230 kg; Calculation factor Y1:2; D1 ≈:1182 mm; Fatigue load limit Pu:2750 kN; Design variant/feature:TDI.1/GWIY2; Calculation factor e:0.33;

Static axial stiffness, preload class B:156 N/µm; Calculation factor fHC:1.02; Preload class A GA:300 N; Static axial stiffness, preload class A:114 N/µm; db max.:104.8 mm; r3,4 min.:1 mm; db min.:97 mm; ra max.:1.5 mm; Basic static load rating C0:76.5 kN; Attainable speed for grease lub

A2:279.4 mm; h:60.325 mm; R2:39.688 mm; S:4.763 mm; Housing:SAF 624; ba:67.469 mm; A1:158.75 mm; Bearing:22324 CCK/W33; Max. speed for Taconite seal:725 r/min; H1:160.325 mm;

Reference speed:14000 r/min; Limiting speed:16000 r/min; Ew:34 mm; Fw:28 mm; Basic dynamic load rating C:20.9 kN; U:17 mm; Basic static load rating C0:33.5 kN; Fatigue load limit Pu:4.15 kN; Mass needle roller and cage assembly:0.024 kg;

da min.:158 mm; G1:17 mm; B1:114 mm; B2 ≈:119 mm; Reference speed:1600 r/min; r1,2 min.:3 mm; Limiting speed:2200 r/min; d2 ≈:175 mm; Calculation factor Y0:1.8; B:96 mm;

Lubricant:Maintenance free &nd; Specific dynamic load factor K:150 N/mm²; ra max.:0.6 mm; Basic dynamic load rating C:1020 kN; M:6.5 mm; Da min.:122.8 mm; B:77.775 mm; r1 min.:0.6 mm; Design (sliding contact surface combination):Steel/steel; b:10.5 mm;

Sealed Speed Rating n3:4000 rpm; Accessories:Two Shields & Snap-R; Oil Speed Rating n2:5300 rpm; Basic Dynamic Radial Load Rating C:95200 N; Grease Speed Rating n1:4000 rpm; B:47.60 mm; d:50.000 mm; Basic Static Radial Load Rating Co:95000 N; Fillet Radius ra:2.00 mm; D:110.0000 mm;